MACHINABLE CAST IRON ALLOY
HIGH STRENGTH ALLOY FOR ALL CAST IRONS INCLUDING CONTAMINATED CAST
IRONS
SOLVES THE PROBLEMS OF ORDINARY CAST IRON ELECTRODES
| FEATURES AND BENEFITS: |
|
| DEPOSITS ARE FULLY MACHINABLE |
INSTANTANEOUS RESTRIKE |
| PERFORMS ON AC OR DC |
SMOOTH, STEADY ARC |
| NO PREHEATING NEEDED |
SOUND, DENSE, POROSITY FREE WELDS |
| WELDS CAST IRON TO STEEL |
NO OVERHEATING |
| APPLICATIONS: |
|
|
| WELDS ALL WELDABLE CAST IRON |
OIL PANS |
MANIFOLDS |
| STEELS TO CAST IRON |
COMPRESSORS |
MACHINE BASES |
| TURBINE HOUSING |
CONTROL VALVES |
PUMP HOUSING |
| ENGINE BLOCKS/HEADS |
PULLEYS |
PUMP BASES |
| IMPELLERS |
GEARS |
BEARING HOUSING |
| AXLE HOUSING |
CRANK CASES |
GEAR BOXES |
| ADDED FEATURES AND BENEFITS: |
|
| UNIQUE ELECTRODE DESIGN PREVENTS OVERHEATING |
PREVENTS ELECTRODE WASTE AND FLUX DAMAGE |
| NO PREHEATING - CAN BE USED AT ROOM TEMPERATURES |
SAVES TIME AND ALLOWS REPAIRS TO BE MADE IN THE FIELD |
SPECIAL FLUX PERMITS POROSITY FREE WELDS, EVEN ON THE DIRTIEST
CASTINGS |
GIVES PIN HOLE FREE MACHINED SURFACES AND STRONG CRACK FREE WELDS |
| FULLY MACHINABLE, NO SPATTER |
IDEAL FOR MACHINED SURFACES |
| OPERATES ON AC OR DC, EVEN ON BUZZ BOXES |
CAN BE USED IN ALL SHOPS, ON ANY TYPE OF MACHINE |
HOW TO USE PROTECTIC 789:
FOLLOW THESE BASIC GUIDLINES: 1.
CLEAN AND VEE OUT THE CRACK. 2.
OPEN IT UP, AS WE WANT TO DO TWO BUTTER PASSES BEFORE JOINTING AND IF
POSSIBLE LEAVE A 3/16″ ROOT OPENING ( IF YOU LEAVE A CRACK BEHIND THE WELD, IT WILL
FAIL, PERIOD!!!!). 3. USE BACK-STEP WELDING TECHNIQUE
AND KEEP THE CASTING BELOW 500°F INTERPASS TEMPERATURE. 4.
NO HEATING IS NEEDED BUT CASTING SHOULD BE WARM AND PROTECTED AGAINST
DRAFTS.
| TECHNICAL DATA |
|
| Tensile Strength: |
up to 70,000 psi |
| Yield Strength: |
|
| Elongations: |
HIGH |
| Machinability: |
Excellent |
| Hardness: |
180-220 BHN |
|
|
|
ELECTRODE
|
|
| PART NO. |
DIAMETER |
AMPS. SETTING |
| 12893 |
3/16″ |
120-170 |
| 12894 |
5/32″ |
90-140 |
| 12895 |
1/8″ |
85-120 |
| 12896 |
3/32″ |
60-100 |
|
|
|
