FOR THE
FASTEST, CLEANEST METAL REMOVAL:
CUTS AND REMOVES ALL METALS INCLUDING STAINLESS STEELS, CAST IRON, MANGANESE AND EVEN ALUMINUM !
|
|
|
|
|
|
|
|
FASTER THAN GRINDING, OR AIR ARCING.
NO CLEAN-UP. JUST WIRE BRUSH. THE CUT IS WELD
READY.
A VERSATILE TOOL FOR THE MAINTENANCE SHOP
FOR FAST WELD PREPARATION OR CUTTING
JOBS USE PROTECTIC 110
| FEATURES | BENEFITS |
| ULTRA LOW CARBON | WILL NOT CONTAMINATE BASE METAL |
| WILL NOT OVERHEAT BASE METAL |
PREVENTS GRAIN GROWTH |
| CAN BE USED WITH AIR ARC | FASTER, CLEANER CUT |
| CUTS THROUGH RUST, DIRT, GREASE AND PAINT |
MADE FOR THE MAINTENANCE SHOP |
| CAN BE USED WITH AC OR DC | CAN BE USED IN ALL TYPES OF SHOPS |
HOW TO USE PROTECTIC 110
DO NOT USE AIR ARC TECHNIQUE, DO NOT HOLD AN ARC. THE ELECTRODE MUST BE KEPT IN FULL
CONTACT WITH THE BASE METAL.
Use AC or DC Straight Polarity, DC Straight gives the best results. Point the tip of the electrode in the direction of
travel, while maintaining a flat ( 7° - 10°) work angle. Maintain full contact with the
base metal and push the electrode rapidly in the direction of travel. Use a sawing motion,
and move rapidly, this is a fast
cut.
| ELECTRODE | ||
| PART NO. | DIAMETER | AMPS. SETTING |
| 12103 | 3/16″ | 275-475 |
| 12104 | 5/32″ | 200-375 |
| 12105 | 1/8″ | 175-275 |
| 12106 | 3/32″ | 120-190 |
WARRANTY AND DISCLAIMER: THERE ARE NO EXPRESS WARRANTIES WHICH EXTEND
BEYOND THE DESCRIPTION ON THE FACE HEREOF. SELLER DISCLAIMS ANY IMPLIED WARRANTIES
OF MERCHANTABILITY OR OF FITNESS FOR ANY PARTICULAR PURPOSE. SINCE SELLER CANNOT
CONTROL THE MANNER OR USE OF ITS PRODUCTS AFTER THEIR SALE, SELLER WILL NOT BE RESPONSIBLE
FOR ANY CONSEQUENTIAL OR INDIRECT DAMAGES. RATHER, SELLER WILL, AT ITS OPTION EITHER
REPLACE THE PRODUCTS SOLD OR REFUND THE PURCHASE PRICE. NO WARRANTIES WILL APPLY IF
THE PRODUCTS ARE IN ANY WAY ALTERED OR MODIFIED AFTER DELIVERY BY SELLER.
