Protectic Welding Alloys & Maintenance Supply

• Porosity in Welds Due To Dirt,
  Grease, or Paint.
• Hot Metal Dripping Down on Vertical
  or Overhead Welds
• Hard To Start Electrodes
• Sticking Electrodes on Small
  Machines
• Poor Penetration
• Welds That Break, or Crack Next To
  The Weld

In arc welding an electrode is used to conduct current through a workpiece to fuse two pieces together. Depending upon the process, the electrode is either consumable, in the case of gas metal arc welding or shielded metal arc welding, or non-consumable, such as in gas tungsten arc welding. For a direct current system the weld rod or stick may be a cathode for a filling type weld or an anode for other welding processes. For an alternating current arc welder the welding electrode would not be considered an anode or cathode.

Welding Products Designed for the Maintenance Department, and
Agricultural/Farm Welding

Protectic Welding alloys have these features and
Benefits:

• Can weld on dirty, greasy, or painted surfaces

• Easy To Use in All Positions
• Are especially designed for the NON-welder
• High Strength and Corrosion Resistant To Ensure High-Quality
  Welds